Home
Videos uploaded by user “NathanWilson”
Building a Fisher Skewb
 
02:26
This was a rough prototype of a Fisher Skewb I threw together in order to better understand the mechanism. I won't be stickering this puzzle as it was made from a speed skewb and so the florian holes make the puzzle look strange. Even so I believe this is the first Fisher Skewb to be made! ---------------------------------------------------------------------------------------------------------------- Please support me on Patreon and help me make more videos! https://www.patreon.com/user?u=2905964&u=2905964&ty=h ----------------------------------------------------------------------------------------------------------------
Views: 157599 NathanWilson
Fused Cubes [Build Video]
 
02:06
Day 9 of my 30 video series! I set aside an entire day for this mod, I really wasn't expecting it to be this simple! Get your puzzles here: speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ----------------------------------------------------------------------------------------------------------------
Views: 35920 NathanWilson
How to Build a 2x9x9!
 
04:01
The largest cuboid I'd ever built up until now was a 3x7x7 and that was almost two years ago. After a spur of the moment decision I decided to to try a complex 'odd to even' layer conversion on a 9x9 to create the 2x9x9. Th method that I used to make this puzzle wasn't the best approach because I decided to modify the middle layer too early into the build which left nothing for the pieces to rest against while evening them all out. When I re-visit this puzzle I'll start by building a 3x9x9 first. Support me on Patreon! https://www.patreon.com/user?u=2905964&u=2905964&ty=h ---------------------------------------------------------------------------------------------------------------- Time: Tightening the puzzle 0:41 Marking the areas that will be glued 0:52 Gluing the pieces 1:07 Cutting the faces 1:11 Sanding the faces 1:19 Disassembly 1:29 Filling the pieces 1:40 Creating the internal layer 1:49 Cutting foam to fill extensions 2:15 Extending the corner cubies 2:17 Sanding the sides of the pieces 2:22 Reassembly to check movement 2:26 Sanding (just to remove excess material) 2:32 Second disassembly 2:38 Extending underneath pieces to cover inner mech 2:47 Sanding the extensions to fit 2:52 Second reassembly 2:59 Sanding all faces to final rough shape 3:02 Third disassembly 3:04 Rounding off each piece individually 3:11 Gluing a single internal piece to a corner (VERY IMPORTANT) 3:14 Third reassembly 3:16 ---------------------------------------------------------------------------------------------------------------- Music Credit: Ella Vos - White Noise https://soundcloud.com/ellavosmusic https://www.facebook.com/EllaVosMusic/ https://www.instagram.com/ellavos/
Views: 149822 NathanWilson
Edgeless 3x3 [Build Video]
 
02:20
Day 24 of my 30 video series! Ever since I build a corner less 3x3 many months ago people have challenged me to build an edgeless 3x3 as well. So here it is! Get your puzzles here: https://www.speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Joakim Karud - Future Funk Also sub to his channel! Great videos by an awesome artist! https://www.youtube.com/channel/UCVBUm9ccjHy0utvlChyrPHA Joakim Karud https://soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library https://youtu.be/AQWSIi1QU-o [email protected] http://www.joakimkarud.com/ https://twitter.com/JoakimKarud http://www.joakimkarud.com/use-my-music/
Views: 151709 NathanWilson
Fused Cube [Build Video] No Epoxy Method!!
 
03:58
Day 8 in my second 30 day build series. So today I threw in the towel because I wanted to open a few doors to our aspiring puzzle modders that don't have all that fancy apoxie sculpt. Hopefully with this approach there'll be no bandage modification that you can't build. This video was made possible by TheCubicle.US the worlds leading twistypuzzle distributor. https://thecubicle.us Note: I do not recommend you use this to fill or extend puzzle pieces. It's extremely hard to sand especially by hand. Social Media: Facebook- https://www.facebook.com/NathanWilsonMakes/ Instagram- https://www.instagram.com/nathanmakesthings/ Twitter- https://twitter.com/NerdBubblegum 2nd Channel- https://www.youtube.com/channel/UCcqzkmPCV-6LD-oenawubBA Merch store- https://teespring.com/stores/nathanwilson Patreon: If you liked the video then consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future build videos for as long as you're a supporter :) Support me on Patreon- https://www.patreon.com/user?u=2905964 Music: Jimmi - Andrew Applepie Hall of the Mountain King - Kevin Macleod Hall of the Mountain King by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1200072 Artist: http://incompetech.com/
Views: 131797 NathanWilson
How to build a Trihedron (No Epoxy)
 
03:20
This mod was surprisingly straightforward requiring only a saw, some glue and most of all NO EPOXY. The puzzle is fully functional and I really love the void cubes mechanism as its both amazingly stable and completely solid. Also thank you to LighTake for the Carbon Fibre 3x3 (I do genuinely like that puzzle) and after picking it back up and putting it back together it now has a place in my collection :) ---------------------------------------------------------------------------------------------------------------- Gr Cubed's Channel: https://www.youtube.com/user/grcubed Buy the Carbon Fibre 3x3 here: http://goo.gl/B3wcLP Buy the Void Cube Here: http://thepuzzlestore.uk/lanlan-3x3-void-cube-puzzle/ ---------------------------------------------------------------------------------------------------------------- Click on the links below to support me! It helps a lot :) Like my content? Support me on Patreon! https://www.patreon.com/user?ty=h&u=2905964&u=2905964 Try Audible.com and get your first month for free! http://www.audibletrial.com/NerdBubblegum Try Dollar Shave Club: http://au.dollarshaveclub.com/ref/index/r/2k23/12h2ay6/s/tx/cx/1/ ---------------------------------------------------------------------------------------------------------------- Music credit: Avenza - Never Sober https://www.youtube.com/watch?v=dyqwznCpIiI
Views: 192747 NathanWilson
A Cylinder on All Three Axis Doesn't Make a Sphere [Build Video]
 
05:59
Day 23 of my 30 video series! "Barreling" a cube on all three of its axis does not result in a sphere! Hopefully making a cylinder on three axis will end this debate once and for all! 6x8x10: https://www.youtube.com/watch?v=3wBUZIhDyxs Get your puzzles here: https://www.speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Joakim Karud - Classic Also sub to his channel! Great videos by an awesome artist! https://www.youtube.com/channel/UCVBUm9ccjHy0utvlChyrPHA Joakim Karud https://soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library https://youtu.be/AQWSIi1QU-o [email protected] http://www.joakimkarud.com/ https://twitter.com/JoakimKarud http://www.joakimkarud.com/use-my-music/
Views: 129012 NathanWilson
How to Build an 11x11 Barrel
 
06:24
So this was my side project for a few months. In this video I went through the process of transforming a Yuxin 11x11 into a cylinder. I'm not calling it a world record yet because I still have to sticker it but that's not far away :) I have to say that although the puzzle looks nearly completed in this build I still have some more work to do on the exterior (I just wanted to get this video out). You can clearly see the marks of the sandpaper that I'll get rid of shortly. Music Credit: Their Story - Approaching Nirvana Buy one of my puzzles here: https://www.etsy.com/shop/TwistyPuzzlerShop
Views: 59922 NathanWilson
Shapeshifting 2x3x3!! [No Epoxy]
 
04:27
Day 25 of my 30 video series! If I'm honest I don't really like these no-epoxy mods, they're all very similar and not very fun in my eyes. But they are easy and cheap to make and they've been continuously requested so enjoy them while they last. I won't be doing many at all after this series is over. Get your puzzles here: https://www.speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Joakim Karud - Loudness & Clarity Also sub to his channel! Great videos by an awesome artist! https://www.youtube.com/channel/UCVBUm9ccjHy0utvlChyrPHA Joakim Karud https://soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library https://youtu.be/AQWSIi1QU-o [email protected] http://www.joakimkarud.com/ https://twitter.com/JoakimKarud http://www.joakimkarud.com/use-my-music/
Views: 154557 NathanWilson
I Turned a 3x3 into a Pyraminx! (Serious)
 
02:57
Day 12 in my second 30 day build series. In this episode I transformed a 3x3 Rubik's Cube into a Pyraminx!! Yeah yeah okay it's not a "Pyraminx" in terms of functionality but you can't say it doesn't look like one! This video was made possible by TheCubicle.US the worlds leading twistypuzzle distributor. https://thecubicle.us Social Media: Facebook- https://www.facebook.com/NathanWilsonMakes/ Instagram- https://www.instagram.com/nathanmakesthings/ Twitter- https://twitter.com/NerdBubblegum 2nd Channel- https://www.youtube.com/channel/UCcqzkmPCV-6LD-oenawubBA Merch store- https://teespring.com/stores/nathanwilson Patreon: If you liked the video then consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future build videos for as long as you're a supporter :) Support me on Patreon- https://www.patreon.com/user?u=2905964 Music: Jimmi - Andrew Applepie
Views: 517250 NathanWilson
Super Floppy Cube 🔥 [Build Video]
 
01:47
Day 12 of my 30 video series! The puzzle that I had planned on finishing today had to go in for another round of extending. The epoxy wasn't going to be cured in time so I had to get creative. Not my usual format but its what I did in an hour! Get your puzzles here: https://www.speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Wild Flower by Joakim Karud https://soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library https://youtu.be/AQWSIi1QU-o [email protected] http://www.joakimkarud.com/ https://twitter.com/JoakimKarud http://www.joakimkarud.com/use-my-music/
Views: 102170 NathanWilson
How to Build a Cornerless 3x3 (No Epoxy)
 
02:28
I can't really think of any mods simpler than this. The puzzle's surprisingly stable although there's a bit of wobbling mid-turn. I'll slap some stickers on this puzzle eventually ---------------------------------------------------------------------------------------------------------------- Like my content? Support me on Patreon to see some of my videos earlier than everyone else! https://www.patreon.com/user?ty=h&u=2905964&u=2905964 ---------------------------------------------------------------------------------------------------------------- Click on the links below to support me! It helps a lot :) Try Audible.com and get your first month for free! http://www.audibletrial.com/NerdBubblegum Try Dollar Shave Club: http://au.dollarshaveclub.com/ref/index/r/2k23/12h2ay6/s/tx/cx/1/ ---------------------------------------------------------------------------------------------------------------- Music credit: Elexive - Valley Santa https://www.youtube.com/watch?v=TA7Hro7OYpc
Views: 36420 NathanWilson
Half a Skewb Build
 
03:10
After making the master half truncated Skewb I just had to make the regular version. This puzzle is the first of its kind! ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Raincloud ollie - Debt https://soundcloud.com/raincloudollie https://www.facebook.com/raincloudolliemusic https://twitter.com/raincloudollie https://www.instagram.com/raincloudollie/ ---------------------------------------------------------------------------------------------------------------- April Fools! This video is part of a larger collaboration between myself and 9 other YouCubers, where we all impersonate someone else. The person in this video is of course ‘JRCuber’ and you can check out his channel here: https://www.youtube.com/user/JRCuber Also, check out the video I made for this collaboration here: https://www.youtube.com/watch?v=8KnYpxzH_zE
Views: 78254 NathanWilson
3x3 Rhombic Dodecahedron [Build Video]
 
02:29
Day 14 of my 30 video series! I always wanted to build a dodecahedral 3x3 but the pentagonal version looks challenging! This was the easy way out ;) This puzzle was a breeze to make and i didn't even need to disassemble it until I had finished the rough shaping. The only hiccup is that I only had 10 shades of sticker material so I'll fix that up later. Get your puzzles here: https://www.speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Joakim Karud - Dreams Joakim Karud https://soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library https://youtu.be/AQWSIi1QU-o [email protected] http://www.joakimkarud.com/ https://twitter.com/JoakimKarud http://www.joakimkarud.com/use-my-music/
Views: 48659 NathanWilson
How To Build a Cubic Pyraminx
 
05:57
After yesterdays video I was swamped with messages and comments from viewers that wanted me to upload the footage I had mentioned. So here's how to build a Cubominx-2 Buy my puzzles here: https://www.etsy.com/au/shop/TwistyPuzzlerShop?ref=hdr_shop_menu
Views: 164065 NathanWilson
How to Build a 3x5x5
 
07:45
The 3x5x5 is a fantastic allrounder when it comes to puzzles and puzzle modding. It's a great puzzle to start with if you want to learn how to build or solve the larger cuboids. The first 3x5x5 I made was almost three years ago and every one I've made since is an improvement over the last. Music Credit: Their Story - Approaching Nirvana Buy one of my puzzles here: https://www.etsy.com/shop/TwistyPuzzlerShop
Views: 82245 NathanWilson
The Unscramblable Cube [Build video]
 
03:24
Day 19 in my second 30 day build series. In this episode I was going to try another I-Cuboid. Rather than simply fuse together pieces on one face I decided to do one face for each axis and see where it went..... Not very far.. This video was made possible by TheCubicle.US the worlds leading twistypuzzle distributor. https://thecubicle.us Social Media: Facebook- https://www.facebook.com/NathanWilsonMakes/ Instagram- https://www.instagram.com/nathanmakesthings/ Twitter- https://twitter.com/NerdBubblegum 2nd Channel- https://www.youtube.com/channel/UCcqzkmPCV-6LD-oenawubBA Merch store- https://teespring.com/stores/nathanwilson Patreon: If you liked the video then consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future build videos for as long as you're a supporter :) Support me on Patreon- https://www.patreon.com/user?u=2905964 Music: Advice - Andrew Applepie
Views: 205243 NathanWilson
No tools/Sandpaper only mod [Build Video]
 
04:09
Day 21 of my 30 video series! Corner twists are cool but also pretty boring so I added a unique twist to this puzzle that makes corner twisting nessesary for the solve. Get your puzzles here: https://www.speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Joakim Karud - Luvly Also sub to his channel! Great videos by an awesome artist! https://www.youtube.com/channel/UCVBUm9ccjHy0utvlChyrPHA Joakim Karud https://soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library https://youtu.be/AQWSIi1QU-o [email protected] http://www.joakimkarud.com/ https://twitter.com/JoakimKarud http://www.joakimkarud.com/use-my-music/
Views: 141557 NathanWilson
3x3 Rhombic Cuboctahedron Giveaway (Closed)
 
01:55
Day 16 of my 30 video series! The Giveaway Winner has been selected This puzzle was easy to build, all it consists of are flat edges like you'd find on a 3x3 octagonal barrel and flat corners like you'd find on a half truncated cube. I really did build this with only a saw and some sandpaper, thats why it also wasn't painted as you can see from the video. 4x4 Rhombic Cuboctahedron (Warning, old cringy content) https://www.youtube.com/watch?v=tBS-LMfUflM Get your puzzles here: https://www.speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Joakim Karud - Luvly Also sub to his channel! Great videos by an awesome artist! https://www.youtube.com/channel/UCVBUm9ccjHy0utvlChyrPHA Joakim Karud https://soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library https://youtu.be/AQWSIi1QU-o [email protected] http://www.joakimkarud.com/ https://twitter.com/JoakimKarud http://www.joakimkarud.com/use-my-music/
Views: 15796 NathanWilson
How to Build a 'Zock Cube'
 
02:04
So I was stuck in limbo this weekend with puzzles to fill and a delayed order of milliputt. I threw this puzzle together out of complete boredom and only discovered what it name was hours after I built it. Music credit: Pools - Words Buy one of my puzzles here: https://www.etsy.com/shop/TwistyPuzzlerShop
Views: 71936 NathanWilson
Square-1 from a 3x3.... Sort of.... [Build video]
 
03:01
Day 7 in my second 30 day build series. I HATE the Square-1! I don't like the way it turns especially with the off centre bisecting cut through the puzzle. That being said the solving strategy is so wildly different from a 3x3 that I thought building a puzzle out of a 3x3 emulating the turning style of a Square-1 would be fun. Social Media: Facebook- https://www.facebook.com/NathanWilsonMakes/ Instagram- https://www.instagram.com/nathanmakesthings/ Twitter- https://twitter.com/NerdBubblegum 2nd Channel- https://www.youtube.com/channel/UCcqzkmPCV-6LD-oenawubBA Merch store- https://teespring.com/stores/nathanwilson Patreon: If you liked the video then consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future build videos for as long as you're a supporter :) Support me on Patreon- https://www.patreon.com/user?u=2905964 Music: Canals - Joakim Karud
Views: 51171 NathanWilson
How to Build a Rubik's Cube Tie Fighter!? (Star Wars)
 
02:31
Day 15 of my 30 video series! It seems that my 'plans' not working out are becoming a regular occurrence... As such this video was a total rush job (I did have other stuff to do today) but I think it was fun and kinda cool. I'll have this on the back burner for a while and get some stickers for it. Get your puzzles here: https://www.speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Joakim Karud - Dreams Joakim Karud https://soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library https://youtu.be/AQWSIi1QU-o [email protected] http://www.joakimkarud.com/ https://twitter.com/JoakimKarud http://www.joakimkarud.com/use-my-music/
Views: 41866 NathanWilson
I Built a Fisher Cube [Build Video]
 
03:14
Day 8 of my 30 video series! The Fisher Cube is an awesome modification to the regular 3x3. If you want to try one of these for yourself than I'd recommend you start with an Octagonal barrel mod first, if you were any good at that then you should give this a try! Get your puzzles here: https://www.speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ----------------------------------------------------------------------------------------------------------------
Views: 25340 NathanWilson
How to Build a Triple fused Megaminx
 
02:42
This puzzle is a 'no epoxy' mod that requires literally no tools and some super glue. Thats it! A few megaminx's and some super glue is all you need!
Views: 47232 NathanWilson
How to Build a fused '2x2 to 5x5' puzzle thingy!
 
03:31
Mods that don't involve epoxy (although boring to me) allow people who don't have access to a whole lot of materials to try their hands at puzzle modding. Hopefully this is within the realm of feasibility for at least some of you guys to try :) Buy the MoYu BoChuang: http://goo.gl/43fE3J Buy the MoYu LingPo: http://www.lightake.com/p/YJ-YJ83208-MoYu-LingPo-2x2x2-Magic-Cube-50mm-_M1135.html ---------------------------------------------------------------------------------------------------------------- Click on the links below to support me! It helps a lot :) Like my content? Support me on Patreon! https://www.patreon.com/user?ty=h&u=2905964&u=2905964 Try Audible.com and get your first month for free! http://www.audibletrial.com/NerdBubblegum Try Dollar Shave Club: http://au.dollarshaveclub.com/ref/index/r/2k23/12h2ay6/s/tx/cx/1/ ---------------------------------------------------------------------------------------------------------------- Music credit: Bright Future - Silent Partner
Views: 83041 NathanWilson
1x3x3 Rubik's Cube [Build Video]
 
03:17
Day 2 of my 30 video series! The 1x3x3 Rubik's Cube is a quick and easy puzzle that you can build in an evening if you have the motivation! Although I managed to screw up half way through mine. Even so if you want a puzzle thats less of a challenge for your non-cuber friends or maybe just an addition to your collection why not give this one a try? Get your puzzles here: https://www.speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Valesco - Cloud 9 https://www.youtube.com/watch?v=nRa-eGzpT6o
Views: 143643 NathanWilson
How to Build a Petamoid
 
05:00
The Petaminx is one of those 'shock and awe' puzzles. The kind I have on my desk just to frighten the occasional visitor. When I saw the response to my Gigamoid I had to do a follow up but with no Teraminx on hand it was straight up to the Petaminx for the next in this series of mods ---------------------------------------------------------------------------------------------------------------- Click on the links below to support me! It helps a lot :) Like my content? Support me on Patreon! https://www.patreon.com/user?ty=h&u=2905964&u=2905964 Try Audible.com and get your first month for free! http://www.audibletrial.com/NerdBubblegum Try Dollar Shave Club http://au.dollarshaveclub.com/ref/index/r/2k23/12h2ay6/s/tx/cx/1/ ---------------------------------------------------------------------------------------------------------------- Music credit: Bright Future - Silent Partner
Views: 55959 NathanWilson
How to Build a Housecube (with no tools)
 
02:20
This Is a quick and simple mod that literally REQUIRES no tools (apart from a screwdriver)... https://speedcubeshop.com was a much better buying and shipping experience than I thought it would be with quick customer service and a large range of puzzles to choose from. I think I may have to re-evaluate buying from Zcube.... (and 'no' I'm not being paid to say that). Buy the YJ Fisher Cube: https://speedcubeshop.com/products/yj-yileng-fisher-cube-ii?variant=17662592453 ---------------------------------------------------------------------------------------------------------------- Click on the links below to support me! It helps a lot :) Like my content? Support me on Patreon! https://www.patreon.com/user?ty=h&u=2905964&u=2905964 Try Audible.com and get your first month for free! http://www.audibletrial.com/NerdBubblegum Try Dollar Shave Club: http://au.dollarshaveclub.com/ref/index/r/2k23/12h2ay6/s/tx/cx/1/ ---------------------------------------------------------------------------------------------------------------- Music credit: TheFatRat - Monody Tobu - My Own Paradise
Views: 31719 NathanWilson
How to Build a Slice Cube
 
02:35
The slice cube was actually pretty easy to build. By using what I'd learnt from building a regular Fisher Cube this puzzle was just a case of extending and filling and sanding. https://speedcubeshop.com was a much better buying and shipping experience than I thought it would be with quick customer service and a large range of puzzles to choose from. I think I may have to re-evaluate buying from Zcube.... (and 'no' I'm not being paid to say that). Buy the YJ Fisher Cube: https://speedcubeshop.com/products/yj-yileng-fisher-cube-ii?variant=17662592453 ---------------------------------------------------------------------------------------------------------------- Click on the links below to support me! It helps a lot :) Like my content? Support me on Patreon! https://www.patreon.com/user?ty=h&u=2905964&u=2905964 Try Audible.com and get your first month for free! http://www.audibletrial.com/NerdBubblegum Try Dollar Shave Club: http://au.dollarshaveclub.com/ref/index/r/2k23/12h2ay6/s/tx/cx/1/ ---------------------------------------------------------------------------------------------------------------- Music credit: TheFatRat - Monody
Views: 38959 NathanWilson
How to Build a micro 5x5x5
 
07:27
This was a semi-difficult build for me, The cutting and sanding don't take an hour and I know my way around the 5x5 mech better than my house. The filling and shaping are however a very time consuming and somewhat of a challenge. Either way this was a great project and I'll happy with how it turned out although I wish the shengshou 5x5 was as stable on the inside as it is out of the box. Music Credit: Broke for free - Budding Buy one of my puzzles here: https://www.etsy.com/shop/TwistyPuzzlerShop
Views: 44967 NathanWilson
A Rubik's Cube Play Button!? 50,000 Subscribers!
 
05:59
50,000 Subscribers is awesome! To mark the occasion I decided to make myself a custom Rubik's Cube Play Button that actually works! If your channel has passed a significant milestone recently why not make one of these for yourself to mark the achievement? Thank you to all the great people that watch my videos and learn from them. I started this year with 20,000 subscribers and the goal hitting 50,000 by the end of 2017, in only a few short months I'm already over 50,000 at the time this video goes out. ---------------------------------------------------------------------------------------------------------------- If you liked the video then consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music: LAKEY INSPIRED - Chill Day https://soundcloud.com/lakeyinspired https://exit.sc/?url=http%3A%2F%2Finstagram.com%2Flakeyinspired https://exit.sc/?url=https%3A%2F%2Fwww.patreon.com%2Flakeyinspired
Views: 334127 NathanWilson
My Puzzle got Mass Produced!
 
03:36
After spending the entire year so-far getting a puzzle design production ready finally MoYu is going ahead with producing the Fisher Skewb. I have no details on price or when the puzzle will be available all I know now is that it's been announced. ---------------------------------------------------------------------------------------------------------------- If you liked the video then consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: LAKEY INSPIRED - Summertime Love https://www.youtube.com/watch?v=cfQfNEOFWZc https://www.patreon.com/lakeyinspired https://soundcloud.com/lakeyinspired https://www.instagram.com/lakeyinspired/?hl=en ---------------------------------------------------------------------------------------------------------------- You may use this footage in your video but please seek my permission first.
Views: 60033 NathanWilson
Why My Puzzles Aren't Overpriced
 
04:02
Selling puzzles isn't something I've ever brought to my channel but sometimes it's not too clear where the price for a puzzle comes from. I still underprice my puzzles but I do that mainly because I do this for fun and selling the puzzle is a secondary goal after the initial build. All money from selling puzzles goes towards funding future projects If you want to buy these puzzles [don't email me, I wont see it] You can buy these puzzles on the Puzzle trader Facebook page: https://www.facebook.com/groups/256742994494420/ My social media: FACEBOOK https://www.facebook.com/NathanWilsonMakes/ INSTAGRAM https://www.instagram.com/nathanmakesthings/ TWEETER https://twitter.com/nathanmakestuff Buy dat merch https://teespring.com/stores/nathanwilson Get your name in my videos!! https://www.patreon.com/nathanwilson Music: Old Instrumental - DJ Dontstop
Views: 23569 NathanWilson
Half Truncated 5x5
 
01:46
Day 12 in my third 30 day build series. In this episode I bring back a puzzle from four years ago. I started this puzzle with the intention of finishing it and making a few extra dollars back in 2014. Fast-forward four years later.. This puzzle is actually great though... The movement is fantastic and its incredibly stable despite cutting down so deep. This video was made possible by TheCubicle.US the worlds leading twistypuzzle distributor. https://thecubicle.us This series is also supported by Aves studio who supplied me with all the apoxie sculpt for this build. https://www.avesstudio.com/shop/apoxie-sculpt/ FOLLOW ME: Facebook https://www.facebook.com/NathanWilsonMakes/ Instagram https://www.instagram.com/nathanmakesthings/ Twitter https://twitter.com/nathanmakestuff Patreon https://www.patreon.com/nathanwilson MERCH: https://teespring.com/stores/nathanwilson
Views: 17478 NathanWilson
I Built a 5 Million Subscriber Rubik's Cube Play Button
 
10:20
I wanted to build a bigger, better play button... I think I overdid it a little. This puzzle was made for Infinite Lists, 5,000,000 subs is pretty crazy and he was hyped when I told him what i was going to build. Check out Infinite Lists: https://www.youtube.com/channel/UC_hSjGOO67A6gIDUcyuv_8A Buy the He-shu 18cm cube here and use code NathanWilson to get 10% off your order: https://thecubicle.us/heshu-super-18cm-p-3199.html Buy apoxie sculpt here and make sure to tell them who sent you!: https://www.avesstudio.com/shop/apoxie-sculpt/ My social media: FACEBOOK https://www.facebook.com/NathanWilsonMakes/ INSTAGRAM https://www.instagram.com/nathanmakesthings/ TWEETER https://twitter.com/nathanmakestuff Buy dat merch https://teespring.com/stores/nathanwilson Get your name in my videos!! https://www.patreon.com/nathanwilson Music: Glow [30.10] - South.vibe Look Busy - YouTube Audio Library (I misspelt this in the video) Great Days - Joakim Karud Future Funk - Joakim Karud Talk - Andrew Applepie
Views: 280155 NathanWilson
Mefferts Bandage Rubik's Cube [Build Video]
 
03:25
Day 5 of my 30 video series! This puzzle is an old favourite of mine and it was nice to re-visit this project. Luckily I made less mistakes this time around! Get your puzzles here: https://www.speedcube.com.au ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Raincloud ollie - Debt https://soundcloud.com/raincloudollie https://www.facebook.com/raincloudolliemusic https://twitter.com/raincloudollie https://www.instagram.com/raincloudollie/
Views: 56903 NathanWilson
How to Build a Megamoid
 
05:40
This was a great puzzle to build, Its fun to combine cuboids with the minx puzzles and it makes for a great solve too. I used a Shengshou Megaminx as the base puzzle and It took me roughly two days to complete. I really recommend this puzzle to anyone that wants to get into building their own puzzles! Music Credit: Gianni Kosta - Tom's Diner Puzzle's Original Creator: gsusfrq https://www.youtube.com/user/gsusfrq Buy one of my puzzles here: https://www.etsy.com/shop/TwistyPuzzlerShop
Views: 31294 NathanWilson
How to Make Apoxie Sculpt Harden in 20 Minutes!
 
03:23
Apoxie Sculpt is my go-to material for all of my puzzle building needs but theres always been one key tradeoff that made it suck. Waiting a full 24 hours for whatever work I've done to cure was just a nightmare. Hopefully with this trick you can speed up your build times or just get things done a lot quicker. This video was supported by Aves Studio (The guys who make Apoxie Sculpt) They sent me a ton of supplies that I'll be using in my upcoming builds! Go to https://www.avesstudio.com to buy all the Apoxie Sculpt you need! Social Media: Facebook- https://www.facebook.com/NathanWilsonMakes/ Instagram- https://www.instagram.com/nathanmakesthings/ Twitter- https://twitter.com/NerdBubblegum 2nd Channel- https://www.youtube.com/channel/UCcqzkmPCV-6LD-oenawubBA Merch store- https://teespring.com/stores/nathanwilson Patreon: If you liked the video then consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future build videos for as long as you're a supporter :) Support me on Patreon- https://www.patreon.com/user?u=2905964 Music: Look Busy - Kevin Macleod
Views: 13254 NathanWilson
5x5 Rhombic Dodecahedron [Build Video]
 
05:17
This was a challenging build and I think I got through it without too many mistakes. Getting to the final shape is no easy process and i ended up having to sand a little lower than planned in order to reach the same uniform shape all round. One issue I have with the puzzle is that theres some slight olzing on the faces which takes away from the 'Master Skewb' illusion if you look at the puzzle from some angles. Watch me build the 3x3 Rhombic Dodecahedron: https://www.youtube.com/watch?v=whUcnmTvoeA ---------------------------------------------------------------------------------------------------------------- If you liked the video then consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Joakim Karud - Boost
Views: 30175 NathanWilson
5x5x7 With 3D Printed Extensions [Build video]
 
09:54
Extensions are always the most time consuming part of modifications. I decided enough was enough and so I explored a new method of using 3D Printed extensions with the help of TwistyTex! Currently the 5x5x7 extensions aren't available but if you contact Casey he should be able to assist you :) Twisty Tex: http://twistytex.com/projects/ I use Apoxie Sculpt for most of my builds. Buy it here: https://www.avesstudio.com Social Media: Facebook- https://www.facebook.com/NathanWilsonMakes/ Instagram- https://www.instagram.com/nathanmakesthings/ Twitter- https://twitter.com/NerdBubblegum 2nd Channel- https://www.youtube.com/channel/UCcqzkmPCV-6LD-oenawubBA Merch store- https://teespring.com/stores/nathanwilson Patreon: If you liked the video then consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future build videos for as long as you're a supporter :) Support me on Patreon- https://www.patreon.com/user?u=2905964 Music: Tropical Thunder - Andrew Applepie Fantasy Prison - Andrew Applepie Jimmi - Andrew Applepie
Views: 33639 NathanWilson
How to Build a 5x5 Barrel [4K]
 
05:43
The 5x5 barrel is a quick an easy puzzle that (provided you have the tools) can be made without much experience. This puzzle is fully functional and shape shifting but the 10 colour version has an added parity which I love. Music Credit: Their Story - Approaching Nirvana Buy one of my puzzles here: https://www.etsy.com/shop/TwistyPuzzlerShop
Views: 27538 NathanWilson
How to Build a 7x7 Barrel
 
06:10
The 7x7 is a great build, but its not without its challenges. I didn't show in the video but I actually had to disassemble and reassemble the puzzle three times rather than just two. Even so it's been a while since I used a 7x7 for a mod so it was good to see some new pieces. The puzzle is just awaiting stickers now although when I get around to applying them is beyond me. Music Credit: Their Story - Approaching Nirvana Buy one of my puzzles here: https://www.etsy.com/shop/TwistyPuzzlerShop
Views: 17046 NathanWilson
How to build a 5x5 Cross cube!?
 
05:57
The cross cube is a crazy and complex puzzle, hopefully proving that any NxNxN puzzle can be modified in this way opens some doors for larger cross-cubes in the future! ---------------------------------------------------------------------------------------------------------------- Click on the links below to support me! It helps a lot :) Like my content? Support me on Patreon! https://www.patreon.com/user?ty=h&u=2905964&u=2905964 Try Audible.com and get your first month for free! http://www.audibletrial.com/NerdBubblegum Try Dollar Shave Club: http://au.dollarshaveclub.com/ref/index/r/2k23/12h2ay6/s/tx/cx/1/ ---------------------------------------------------------------------------------------------------------------- Music credit: TheFatRat - Never Be alone (Tasty Release) https://www.youtube.com/watch?v=Ic-gZlPFTkQ Tobu - My Own Paradise https://www.youtube.com/watch?v=AybGJn52nxo
Views: 53606 NathanWilson
How to Build a 3x4x4 [Out of a 4x4!?]
 
06:29
The 3x4x4 was a VERY difficult and tedious build but I was happy with the result. The puzzle itself is a bit stiff but it is fully functional. There are two equally practical methods from building a 3x4x4 out of a 4x4x4. The first is the method I used in this video and the second is much like a 2x4x4 modification but with visible pieces from the internal layer. The reason I didn't use that method is because it would have taken twice as long! Music Credit: Their Story - Approaching Nirvana Buy one of my puzzles here: https://www.etsy.com/shop/TwistyPuzzlerShop
Views: 32865 NathanWilson
Pyra-cube Experiment [Build Video]
 
03:10
Day 10 in my second 30 day build series. In this episode I wanted to test the limits of the QiYi Sail mechanism by cutting down as far as I possibly could. The goal was to bring the resulting surfaces on the cut down faces to perfect right angled triangles which I succeeded with. This puzzle will be used as the base of an upcoming modification of a similar nature. This video was made possible by TheCubicle.US the worlds leading twistypuzzle distributor. https://thecubicle.us ======================================================== WARNING! THIS MODIFICATION ONLY WORKS ON THE QIYI SAIL!! ======================================================== Social Media: Facebook- https://www.facebook.com/NathanWilsonMakes/ Instagram- https://www.instagram.com/nathanmakesthings/ Twitter- https://twitter.com/NerdBubblegum 2nd Channel- https://www.youtube.com/channel/UCcqzkmPCV-6LD-oenawubBA Merch store- https://teespring.com/stores/nathanwilson Patreon: If you liked the video then consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future build videos for as long as you're a supporter :) Support me on Patreon- https://www.patreon.com/user?u=2905964 Music: Debt - Raincloud Ollie
Views: 16098 NathanWilson
How to build a Fisher Cube [Tutorial] OLD VIDEO
 
03:30
For this tutorial you will need to start with an Octagonal Barrel. You can build one by following my tutorial here: https://www.youtube.com/watch?v=KVeFgT1sgfI Of course I must give credit to the puzzle's original creator mr Tony Fisher (where this puzzle gets its name). I bought my first Fisher cube over three years ago and it was one of the first 3x3 variants I ever owned. The materials and tools required for both this build and the Octagonal Barrel tutorial are: - A 3x3x3 - Milliput - Hacksaw - Hobby knife - Sandpaper (or belt sander) - Spray paint If you have any questions all you have to do is ask and remember! watch the video all the way through before you start! Buy my puzzles here: https://www.etsy.com/au/shop/TwistyPuzzlerShop?ref=hdr_shop_menu
Views: 78511 NathanWilson
How to Build a Gigamoid
 
06:17
Ask and you shall receive. This is an awesome puzzle and I can't wait to sticker it up in a sticker set straight from Oliver! Shengshou was a fantastic choice as the modding base, Mf8 is far too unstable and C4y was just not ever an option. Music Credit: Their Story - Approaching Nirvana Buy one of my puzzles here: https://www.etsy.com/shop/TwistyPuzzlerShop
Views: 24600 NathanWilson
40,000 Subs Q&A
 
12:48
If your question didn't get answered then make sure to ask me in the comments below :) ---------------------------------------------------------------------------------------------------------------- If you liked the video than consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ----------------------------------------------------------------------------------------------------------------
Views: 7750 NathanWilson
The Penrose Cube 5x5 [Build Video]
 
04:28
Day 11 in my third 30 day build series. In this episode I re-visit one of my favourite 3x3 mods but this time adapted to work on the 5x5. Check out the original designers channel: https://www.youtube.com/channel/UCxz9ho1i9Er4QMRt5Q1LgmQ This video was made possible by TheCubicle.US the worlds leading twistypuzzle distributor. https://thecubicle.us This series is also supported by Aves studio who supplied me with all the apoxie sculpt for this build. https://www.avesstudio.com/shop/apoxie-sculpt/ FOLLOW ME: Facebook https://www.facebook.com/NathanWilsonMakes/ Instagram https://www.instagram.com/nathanmakesthings/ Twitter https://twitter.com/nathanmakestuff Patreon https://www.patreon.com/nathanwilson MERCH: https://teespring.com/stores/nathanwilson
Views: 62516 NathanWilson
How did I Screw up a Teramoid!?
 
03:40
Just when I think I have these puzzle mechanisms figured out I discover a whole new aspect to their design. I'm going to re-make this puzzle with a flatter layer thats of the same proportions to the other external layers on the regular teraminx. hopefully this should make for a better looking puzzle and a more interesting top and bottom face pattern. ---------------------------------------------------------------------------------------------------------------- If you liked the video then consider supporting me on Patreon. It's totally optional but YouTube is my full-time job and every dollar really helps! You'll also get your name on all future videos for as long as you're a supporter :) Support me on Patreon: https://www.patreon.com/user?u=2905964 ---------------------------------------------------------------------------------------------------------------- Music Credit: Joakim Karud - Classic
Views: 10334 NathanWilson